G01-100 Acetylene Cutting Nozzle | Red Copper & Brass | Large-Bore Outlet + Annular Orifice | For G01-100 Injection-Type Cutting Torch
Model: G01-100 Acetylene Cutting Nozzle | Sizes 1#, 2#, 3# | For G01-100 Injection-Type Cutting Torch
Product Overview
This G01-100 acetylene cutting nozzle is made of red copper and brass. It adopts a large-bore gas outlet and annular orifice structure, with a total length of 65mm. Available in sizes 1#, 2#, and 3#, it delivers stable flame performance, high-temperature resistance, and anti-deformation properties, compatible with the G01-100 injection-type cutting torch.
Key Advantages
Uniform Gas Output, Concentrated Flame
The large-bore gas outlet and annular orifice structure ensure uniform gas output with a concentrated cutting flame for efficient cutting.
Neat Cutting Surface, Less Slag
The concentrated flame produces a neat cutting surface with little slag, reducing post-cut cleanup.
High-Temperature Resistance & Anti-Burn-Out
High-temperature resistance and anti-burn-out construction ensures long service life under demanding cutting conditions.
Complete Size Options, Quick Replacement
Complete size options allow quick and easy replacement for different steel thickness cutting requirements.
Red Copper & Brass Construction
Made of red copper and brass for excellent thermal conductivity and durability.
Technical Specifications
| Item | Parameter |
|---|---|
| Model | G01-100 Acetylene Cutting Nozzle |
| Sizes | 1#, 2#, 3# |
| Total Length | 65mm |
| Material | Red Copper & Brass |
| Applicable Gas | Acetylene |
| Matching Torch | G01-100 Injection-Type Cutting Torch |
| Cutting Thickness | 10–100mm |
| Design | Large-Bore Gas Outlet, Annular Orifice |
| Cutting Method | Manual Flame Cutting |
Size & Cutting Thickness Reference
| Size | Cutting Thickness (mm) |
|---|---|
| 1# | 10–25 |
| 2# | 25–50 |
| 3# | 50–100 |
Reference values only. Actual cutting thickness depends on torch model, gas pressure, and operating conditions.
Applications
Sheet-Metal Processing: Cutting of steel plates
Steel-Structure Fabrication:Cutting of structural steel components
Equipment Maintenance: Repair and maintenance cutting operations
Matched with the G01-100 manual injection cutting torch for acetylene flame cutting. Applied for carbon steel plate cutting with a thickness of 10–100mm.
Usage Instructions
Installation: Select the appropriate size nozzle based on plate thickness. Screw the nozzle securely onto the G01-100 cutting torch. Ensure a tight fit to prevent gas leakage.
Pre-Use Check: Inspect the nozzle for damage or blockage. Verify that the gas outlet and annular orifice are clean and unobstructed. Check all connections for leaks.
Flame Adjustment: Adjust the preheat oxygen and acetylene valves to achieve a stable flame. Use a neutral flame for most cutting applications.
Cutting Operation:Preheat the workpiece to the ignition temperature, then press the cutting oxygen lever to begin cutting. Maintain a steady travel speed for a smooth cut.
Safety Precautions:
Always check for gas leaks before use.
Wear appropriate eye protection during cutting.
Ensure adequate ventilation in the work area.
Keep flammable materials away from the cutting zone.
Allow the nozzle to cool before handling or replacing.
Maintenance: Clean the nozzle regularly to remove slag and spatter. Check the gas outlet and annular orifice for blockage. Store in a dry environment to prevent corrosion.
FAQ
Q: What material is this nozzle made of?
A: It is made of red copper and brass, providing excellent thermal conductivity and durability.
Q: What is the difference between this nozzle and a propane nozzle?
A: This nozzle is specifically designed for acetylene fuel. The internal geometry and gas passages are optimized for the combustion characteristics of acetylene.
Q: What is the total length of the nozzle?
A: The total length is 65mm.
Q: What torch is it compatible with?
A: It is designed for use with the G01-100 injection-type cutting torch.
Q: What cutting thickness does it cover?
A: The available sizes cover a cutting thickness range of 10–100mm. Select the appropriate size based on your plate thickness.
Q: How do I choose the right size?
A: Use 1# for 10–25mm, 2# for 25–50mm, and 3# for 50–100mm. Actual performance depends on gas pressure and operating conditions.
Q: What is the advantage of the large-bore gas outlet and annular orifice design?
A: This design ensures uniform gas output with a concentrated cutting flame, resulting in a neat cutting surface with little slag.